Home     Nodes     Bridges     TG Status     Talkgroups     Most Active     XLX Reflector     Pi-Star Setup     Pi-Star Options 

WNY-DIGITAL - Western New York's Multi-Protocol Digital Amateur Radio Network

 .: Pi-Star Setup :. 

Pi-Star

  • Log in to your Pi-Star dashboard and perform an update.
  • After the update, click on Configuration.
  • In DMR Master select "FreeDMR_NewYork".
  • If you run more than one hotspot, select a unique ESSID for this one.
  • Ensure you're using Colour Code 1.
  • Add any static groups using the Options Line (see below) if needed.
  • Click save.

    ** If not using static talkgroups, just PTT the talkgroup you want and it will be activated dynamically (Takes about 3 seconds). Then PTT again with your traffic.
WNY-DIGITAL does not require the use of "individual" logins or passwords, a VALID DMR ID, Callsign and passw0rd are all you need.

Options Line

You can use the Options Calculator to generate a Pi-Star Options line.

Example: 

	In the "Options=" field enter, "KEY=your-api-key;TS2=310441;DIAL=0;VOICE=1;SINGLE=0;LANG=en_GB;"
  • KEY - API Key to remotely control TG's and Options in Pi-Star
  • TS2 - TGs - Comma separated list of static talk groups.
  • DIAL - TG - Set default Enhanced Talk Groups (Dial-a-TG) TG9 Slot 2 TG. (Duplex Hotspots and Repeaters)
  • TIMER - Minutes - Number of minutes dynamic talk groups are active for after keyup.
  • SINGLE - 0|1 - Single dynamic talk group mode.
  • VOICE - 0|1 - Radios will RX from the local network "This is CALL-SIGN FreeDMR".
  • LANG - en_US|en_GB - Language for Voice Announcements.

DMRGateway

Example configuration: 
	[DMR Network 1]
	Enabled=1
	Name=FreeDMR_NewYork
	Address=hs.wny-digital.network 
	Port=62031
	PCRewrite=
	PCRewrite=
	PCRewrite=
	PCRewrite=
	PCRewrite=
	PassAllTG=1
	PassAllTG=2
        PassAllPC=1
        PassAllPC=2
	Password=passw0rd
	Debug=0
	Options=
	Location=0

Contact Us

Feel free to Join our HAM Chat (Apps available in the app stores)

If you need to reach us by other means: